- Info@cleaningtime.co.uk
- Mon - Fri: 8:00 - 18:00
- YouTube
Edwardian/Victorian Mosaic Tiled Floor Cleaning & Sealing in Nuneaton Warwickshire.
We Are Experts In Restoring Your Victorian/Edwardian Tiles Back To Brand New Again!
We Specialise in restoring, cleaning, polishing and sealing Edwardian, Victorian or Mint mosaic tiles. If your once beautiful and stylish tiles are not looking their best, we can restore them for you! We will leave them looking as good as new!
Extremely popular in both rural and urban properties, Victorian, Edwardian geometric and encaustic tile floors are created from durable clay. As you can see from the photos above using specialist Victorian tile and grout cleaning methods and products we have completely cleaned and restored this Victorian-Mint tiled floor in Nuneaton.
At some point in time your Victorian floor will require a complete restoration, this could be due to loss of shine and clarity in the floor, scratches, grout damage, irremovable traffic patterns, problem staining or any other defect which cannot be remedied by general cleaning alone.
Daily cleaning will help to keep the floor looking it’s best for many years to come. Regular wet and dry mopping using a clean flat micro-fibre mop and a high quality PH. neutral stone cleaner will keep your floor always looking its best. These same results can be achieved if you have an old terracotta or quarry tile floor, our extensive experience in all types of floor restoration will give you peace of mind when choosing a stone care professional.
Warwickshire Locations Cleaning Time Nuneaton Cover Our Slate Restoration Services In:
Coventry, Bedworth, Rugby, Atherstone, Tamworth, Kenilworth, Kineton, Dunchurch, Nuneaton, Hinckley, Leicester, Warwick, Solihull, Birmgingham, Leamington Spa, Claybrooke Magna, Higham On The Hill, Bulkington, Hartshill, Atherstone, Stoke Golding, Grendon, Sharnford, Polesworth, Sapcote, Many More Towns & Villages
Our Six Steps to Success Cleaning Process!
1: We inspect your floor before the cleaning process
This is to identify any limitations like stain removal, loose grout, surrounding surfaces sensitive to cleaning solutions and any other areas that need consideration before the cleaning starts.
2: We Protect Your Walls and Furniture
This is to limit overspray on to sensitive areas during the cleaning process.
3: Agitation
This is done by means of a rotary cleaning machine or by hand depending on the areas to be cleaned.
4: Rinse
Slurry (Dirt from the floor and cleaning solution mixed together) with our pressurised cleaning equipment. We sometimes we have to repeat the cleaning process as described above to ensure optimum results.
5: Drying
After the cleaning process has been completed, we will clean up and dry any areas. In cases where the stone or tile has a high porosity, drying can take up to 12- 24 hours.
6: Impregnator Sealer
The Impregnator penetrates below the surface of the stone and grout and acts as a repellent for any liquid based spills, and also makes on-going maintenance easier.
